Hello & Welcome to the Plant And Construction Forum !!
If this is your first visit, be sure to
check out the HELP section by clicking the
link at the bottom of the page. You WILL have to register
before you can post or view any pictures, DO NOT pm admin asking why you cant view pictures, as you need to be a member for 3 days and have over 3 posts before some content is available: click the sign up link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
The tapping...? Hmmmmm, are absolutely sure it's the HP? There is a bracket which supports the exhaust around the location of the HP - just a small elbow bracket - and if that isn't in the right place then there is a bit of a racket caused by vibration.
Good thing to check the bolts rattle out from the bell housing on one side, and the captive nut on the exhaust, which also looses the housing welded to the exhaust for the captive nut and it rattles all the time, but much more noticeable at certain revs.
Lovely paint job as the guys were saying
A boom ram guard (bolt is still in place ... but bottom guide isnt) and sort those pipes, she be as good as new
Please don't PM me for plant advice.. thanks .. Post in the forum where I will gladly help, as will many of our contributors.. as the info and responses will help everyone else, which is why we exist
Comment