Tweet
i have a jcb 3cx backhoe 2002 .i just change the master cylinders for the brakes. now it is not going forward or backward. please
help me.
help me.
-
-
shuttle isolation button stuck in on the front bucket lever knob?
or the pedal on the floor to disconnect drive is stuck down?
or you've disturbed a fuse feeding power to the shuttle solenoids/switch on column?
Almost certainly electrical
are the master cylinders still behind the instrument cluster, behind the windscreen, on this age model??
If it's got tracks, wheels, t*ts, or an engine, at some point it's gonna give you trouble!!
-
yes below windscreenOriginally posted by v8druid View Postshuttle isolation button stuck in on the front bucket lever knob?
or the pedal on the floor to disconnect drive is stuck down?
or you've disturbed a fuse feeding power to the shuttle solenoids/switch on column?
Almost certainly electrical
are the master cylinders still behind the instrument cluster, behind the windscreen, on this age model??Comment
-
My money'd be on a wire disturbed/pulled off from delving about in there changing the master cylinders thenOriginally posted by alfalah View Post
If it's got tracks, wheels, t*ts, or an engine, at some point it's gonna give you trouble!!Comment
Comment