Lifton LS750

[Maniman]

Hi looking for information on testing / repairing the transmission on a LS750. Fault seems to be stuck in high speed no creep control. Cant use it as its either flat out or stopped. Tried removing throttle cable activation cable & removing the rectangular block which is bolted to the main body still no luck.
Old type of dumper without electrical Fwr/Rev lever. Manual lever next to seat Anybody have any ideas or set up manual Thank

[Muz]

Hi looking for information on testing / repairing the transmission on a LS750. Fault seems to be stuck in high speed no creep control. Cant use it as its either flat out or stopped. Tried removing throttle cable activation cable & removing the rectangular block which is bolted to the main body still no luck.
Old type of dumper without electrical Fwr/Rev lever. Manual lever next to seat Anybody have any ideas or set up manual Thank

Sounds like the variable flow pump is stuck on full delivery and a stuck swash plate ?

[Mick-the-fitter]

Sounds like the variable flow pump is stuck on full delivery and a stuck swash plate ?

I agree Muz, that the swash plate may be stuck, pump would need to be looked at,

Mick

[Muz]

I agree Muz, that the swash plate may be stuck, pump would need to be looked at,

Mick

Whats the view on the cause Mick ? something in the pump.. or a control line holding it full open

[Maniman]

I agree Muz, that the swash plate may be stuck, pump would need to be looked at,

Mick

Thanks for all the advise to all of you, i will strip down the control valve and blow clean to check there's no obstructions in oil ways ect. If anyone has a parts drawing or a link to manual would be great. Hope a can help you chaps at sometime

[Mick-the-fitter]

Thanks for all the advise to all of you, i will strip down the control valve and blow clean to check there's no obstructions in oil ways ect. If anyone has a parts drawing or a link to manual would be great. Hope a can help you chaps at sometime

I recon con we could do with some photos of the transmission, with the floor plate out!

Mick