Jarmet Pan Mixer

[Const355]

Anyone know anything about these mixers? Oil coming out drive shaft from gearbox?

Took off casing but only looks like dust seal holding oil in unless there is something behind shaft bearing?

[Muz]

Anyone know anything about these mixers? Oil coming out drive shaft from gearbox?

Took off casing but only looks like dust seal holding oil in unless there is something behind shaft bearing?

Its not been overfilled has it ?

[v8druid]

sealed for life bearing reached the end of it's perceived life span ... and failed to live up to its name ??

[Const355]

No not over filled, asked about today,looks like seal is least of the problem, as druid says new drive bearing required! Skip time...

[v8druid]

No not over filled, asked about today,looks like seal is least of the problem, as druid says new drive bearing required! Skip time...

"skip time " it's only a bearing how buggered is it ??

[Muz]

"skip time " it's only a bearing how buggered is it ??

Aye .. I'm with the canny Welsh man

[Const355]

Aye .. I'm with the canny Welsh man

Ha only joking,well so far!

not had another look, when running it is a constant drip of oil, trouble is need to strip it all down to find out exactly what story is, polish mixer so there is no parts diagram or parts etc, will need to go to bearing shop when old bearing comes out.

[v8druid]

Aye .. I'm with the canny Welsh man

just form an orderly queue behind my left shoulder there Mr Muz ..... I'll give him scrap value for it ...... 'less it's completely fooked

[v8druid]

Ha only joking,well so far!

not had another look, when running it is a constant drip of oil, trouble is need to strip it all down to find out exactly what story is, polish mixer so there is no parts diagram or parts etc, will need to go to bearing shop when old bearing comes out.

Bugger that's spoilt me night

[Const355]

Had a look tonight,

It is a Reduco gearbox p/n S015221602, cant find any info or parts diagrams for it

Dont wont to start stripping it untill i know a bit more about the workings of it.

[Muz]

Had a look tonight,

It is a Reduco gearbox p/n S015221602, cant find any info or parts diagrams for it

Dont wont to start stripping it untill i know a bit more about the workings of it.

Might come out as a whole unit once youve got the drive pinion off the outside of the case .. and just a case of getting the bearing number then .. local machine shop should find seals ok ?

[v8druid]

Had a look tonight,

It is a Reduco gearbox p/n S015221602, cant find any info or parts diagrams for it

Dont wont to start stripping it untill i know a bit more about the workings of it.

Take the bull by the horns and rip it to bits ...... someone built it....therefore it'll come to bits ... only way to suss your problem

Stuff is usually easier than it looks, once you get into it

[Const355]

Take the bull by the horns and rip it to bits ...... someone built it....therefore it'll come to bits ... only way to suss your problem

Stuff is usually easier than it looks, once you get into it

Or your still looking for the scrap value in it...

[v8druid]

Or your still looking for the scrap value in it...

well don't lose any of the bits ......... just in case, like