Volvo EC70 Puma Problems

[torentino]

OK so they take the response from a sender unit, and the brain works out the correct fault code ? or action (ie shut down) .. Whats fried that one ?.. looks a bit corroded .. Did you notice the resin was discoloured and just started digging ?

The wiring was fried at time and short circuited the output occasionally. And yes, the resin above output changed color, so this was an easy one discover. But now, no alarm from "brain", only shut off after second..

[torentino]

OK, solved the problem of starting. The battery was weak, PUMA sends only 9,80V to fuel solenoid.Bricked for a moment to main +12v supply, started and charged battery to proper voltage, then works. Maybe a solenoid is weak or blocked.
Then another problem arose, no power for main hydraulic valve, ever after lovering the joystick console. Beeps one time, but nothing at pin 8. Nothing at pin 6, when changing from slow to fast moving, only one beep, nothing at pin 10. When measuring pins at power electronic relay for output 6, the thing started and works. I thing that the measuring pin pressure made the difference.Replaced my last VN16B for pin 6, machine normal for a day. Now is dead again, no output at pin 8. Waiting for new spare relays. grrrr....