Tweet
I have a KX 71 with no servo control and have flow and return to the valve but nothing coming out of the servo pipes to the hand controls wondered if any one can advise on what's in the relief valve and pressures for the servo systems
-
-
Might be the servo pump is dead?Please don't PM me for plant advice.. thanks .. Post in the forum where I will gladly help, as will many of our contributors.. as the info and responses will help everyone else, which is why we exist.gif "thumbs up")
-
I think you are right I took pressure pipe off of servo pump and run engine with no oil coming out, I have checked suction line is clear and not delaminateingOriginally posted by Muz View Post
Do you have any idea where to get a pump as I go Quoted £1180.00 by a main dealerComment
-
A few month ago I fitted a new engine in a kubota u10, I had no reponce on the hand control but they work before, I had to over fill the hydraulic tank to raise the level up to the servo pump, I run it for a few mins then let the oil back to the level and never had an other problem, could be a something like that.Comment
Comment